Movement explorer
Seiko 4R35
Winding, timekeeping and the date mechanism. Inside an automatic.

Educational reconstruction · Architecture based on the 4R35B technical guide
Watches with the 4R35
- Seiko SRP841J1Presage Cocktail Time
- Seiko SRP839J1Presage Cocktail Time
- Seiko SRP852J1Presage Cocktail Time
Component guide
- Oscillating weight
- Turns wrist movement into energy for automatic winding.
- Pawl-lever winding
- The pawl lever and reduction wheels transfer winding motion toward the mainspring.
- Mainspring barrel
- Stores the mainspring’s energy and releases it through the wheel train.
- Wheel train
- Carries energy from the barrel toward the escapement and time display.
- Pallet fork & escapement
- Releases the train in steps and gives impulses to the balance.
- Balance & hairspring
- The timekeeping oscillator: three full oscillations, or six beats, per second.
- Date mechanism
- The dial-side mechanism advances the date. The 4R35 has no day-of-week disk.
- Crown & setting works
- Selects winding, date correction or time setting through the crown.
- Main plate & bridges
- Supports the pivots and moving parts.
Sources & model notes
This is original illustrative geometry, not manufacturer CAD or service instructions. Individual contours, depths, tooth counts and motion amplitude are approximate. Seiko has not endorsed this reconstruction.
Seiko 4R35B / 4R36A technical guide, pages 1–7: 27.4 mm outside diameter, 27.0 mm casing diameter, 5.32 mm height, 24 jewels, 21,600 beats/hour and approximately 40 hours reserve for the documented 4R35B. The 4R36 day mechanism is omitted.
The linked watch specifications identify 4R35, 23 jewels and approximately 41 hours; they do not establish the B revision. These links show family relevance, not parts compatibility. The guide distinguishes A and B parts; this model does not certify interchangeability.
Sources checked 1 November 2026. No manufacturer illustration or CAD asset is redistributed.
| Component | Guide evidence |
|---|---|
| Oscillating weight | Page 5 · Part 1 |
| Pawl-lever winding | Page 6 · Part 23 on page 5; part 35 on page 6 |
| Mainspring barrel | Page 6 · Part 42 |
| Wheel train | Page 6 · Parts 39–41 on pages 6–7; part 46 on page 7 |
| Pallet fork & escapement | Page 5 · Part 30; escape wheel on page 7 |
| Balance & hairspring | Page 5 · Part 27-1; frequency on page 1 |
| Date mechanism | Page 3 · Pages 3–4, excluding 4R36 day-only parts |
| Crown & setting works | Page 7 · Parts 48–54 |
| Main plate & bridges | Page 7 · Parts 22, 32 and 55 |
At 1× the balance makes three oscillations per second. The pallet, escape wheel and train share that clock; their tooth counts, ratios, amplitude and contact timing are illustrative. This is not a physical simulation. The rotor, winding and date mechanisms remain still during this running demonstration.